Serial Number: 183567
MCR-A5CII 35x65 (5C kit) with OSP-P300M CNC Controller
Travel:
- X-axis: 6.700 mm
- Y-axis: 4.100 mm
- Z-axis: 800 mm
- W-axis: 1.200 mm
- Table to spindle nose: 0 to 1800 mm
Table Dimensions:
- Working Surface: 3000x6500 mm
- Maximum Load capacity: 37.000 kg
- T-Slots (width x Nº): 24 H7 x 15
- Height from Machine Bottom: 950 mm
Spindle
- Speed range: 30 to 4.000 min-1
- Taper bore: 7/24 Nº 50
- Bearing dia meter: Ø 100
Kit 5C Specifications
-
- Spindlehead indexing at every 1-degree (instead f STD 5-degree indexing)
- Extensin attachment head, L150, 6,000min-1, 26kW (for through spindle coolant system) (i/o STD Extension attachment head L150, 4,000min-1)
- 90-deg angular attachment head, 1-deg L355, 3,000min-1, 11kW (fr through spindle coolant system) *There is Y-axis limitation (i/o STD 90-deg angular attachment, L150, 3,000min-1, 22kW)
- BC attachment 1º 6000 rpm
- Thrugh-spindle-coolant system for machine, 2MPa high/low pressure switchable, incl. spindle through air blower during spindle rotation
Feedrates
- Rapid Travers: X: 30, Y:30; Z:20 m/min
- Feedrate: 1-10.000 mm/min
- Crossrail Traverse: 3 m/min
Automatic tool Changer:
- Tool Shank: MAS BT50
- Tool magazine capacity: 50
- Max. Tool diameter: Ø 135
- Max. Tool length: 400 mm
- Max. Tool weight: 25kg
Motor:
Power Sources
- Electric power supply: 60KVA
- Compressed air supply: 650 l/min
- Oil mist supplier, from eyeball nozzle
- Oil skimmer
- Special Coolant pump 1.1kW
- RAM oil pan oil collect device
BIG Plus arrangement for each attachment Machine installation below floor level (Wiring arrangement below ground level) up to 1,000mm Chip conveyor, floor type, Lift-up 2 pcs along total bed length, Front side chip disposal Cross rail shower coolant Work washing gun Full enclosure shielding (without the ceiling) 35x65,CE Slope machining function MCR-A5CII.